This is speaker has a marvelous flat like response...think "JBL D-120"

click to enlarge

FluxTone Model 2

50 Watts rms, 8 Ohms, 12 inch, 15 pounds, This driver has a smooth, straightforward and full-bodied tone with high frequency chime.

Demonstration

Microphone Beyer M 160 @ 18 inches (on axis)
Pre-Amp Grace Design M 501
Guitar Mexican Strat (Dimed)
Hear it 'Clean'

Flash required

Hear it 'Dirty'

Flash required

Left Channel = Crown D-75 (Everything set Flat)
Right Channel = Tweed DeLuxe (Volume-3, Tone-12)

Left Channel = Black face DeLuxe Reverb Volume 10, Treble 5, Bass 5
Right Channel = AC-30 top boost Volume 8, Treble 5, Bass 5

Includes VMT "Speaker Control" and Wires

click to enlarge

$1125 (list) + $50 Shipping in lower 48 states.

(If you're outside of this area, please Contact Us before ordering.)

Qty:

Technical Information

Jensen model (C12N) 50 watt 8 Ohm
This is the voice of a modern Jensen C12N. These images are relative.

FluxTone Model 2 50 watt 8 Ohm
This is the voice of a FluxTone Model 2. As you can see the pattern is nearly the same.

Thiele & Small Parameters

Magnet Type (Alnico Topology) Copper & Iron
Magnet weight 11.7 Lbs.
Resonant Frequency(fs) 112Hz
DC Resistance (Re) 6.5
Coil Inductance (Le) 0.90mH
Mechanical Q (Qms) 7.01
Force Factor (BxL) 12.11 Wb/m
Total Q (Qts) 0.92
Compliance Equivalent Volume (Vas) 27.6 liters
Mechanical Compliance (Cms) 82 µm/N
Diaphragm Area (Sd) 490.8 cm²
Reference Efficiency (no) 3.48%
Maximum Linear Excursion (Xmax) 1.0mm
Losses Electrical Resistance (Res) 42.5 ohms

© 2014 FluxTone, Inc.