That Vintage American Voice that started it all.
FluxTone Model 1
Ultra High Efficiency, 50 Watts rms, 8 Ohms, 12 inch, 13 pounds, Vintage American tone, with sparkle and definition to die for. Massive back porch!
|Microphone||Beyer M 160 @ 18 inches (on axis)|
|Pre-Amp||Grace Design M 501|
|Guitar||Mexican Strat (Dimed)|
Clean - Crown D-75 (Everything set Flat)
Clean - Tweed DeLuxe (Volume-3, Tone-12)
Dirty - Black face DeLuxe Reverb Volume 10, Treble 5, Bass 5
Dirty - AC-30 top boost Volume 8, Treble 5, Bass 5
Includes VMT “Speaker Control” and Wires
Only a few of these original FluxTone speakers left… When they are gone, they are gone.
$1700 (list) + $ Shipping in lower 48 states.
(If you're outside of this area, please Contact Us before ordering.)
Jensen Model (P12R) 25 watt 8 Ohm
This is the voice of an original Jensen P12R, from a well preserved 50 year old driver.
FluxTone Model 1 50 watt 8 Ohm
This is the voice of a FluxTone Model 1. As you can see the pattern is nearly the same.
NOTEFrequencies from a guitar speaker below 60hz are influenced more by the cabinet structure than the speaker, and frequencies above 6khz too high for any 12 inch cone to reproduce in a way that can be heard over the normal sounds coming from that speaker (that's why there are tweeters). That being factual, we say "ignore" the data on the graphs below 60hz and above 6khz because they have no bearing on this test.
|Thiele & Small Parameters|
|Magnet Type (Alnico Topology)||Copper & Iron|
|Magnet weight||11.7 Lbs.|
|DC Resistance (Re)||7.44|
|Coil Inductance (Le)||0.70mH|
|Mechanical Q (Qms)||6.15|
|Electromagnetic Q (Qes)||1.18|
|Total Q (Qts)||0.99|
|Compliance Equivalent Volume (Vas)||32.5 liters / 1.2 cu.ft.|
|Mechanical Compliance of Suspension (Cms)||0.09mm/N|
|BL Product (BL)||12.9 T-M|
|Diaphram Mass inc. Airload (Mms)||32 grams|
|Efficiency Bandwidth Product (EBP)||80|
|Maximum Linear Excursion (Xmax)||0.5mm|
|Surface Area of Cone (Sd)||506.7 cm²|